AC Compressor Fit For 2007 2008 2009 2010 2011 2012 2013 2014 2015 Honda CRV

Description

Description
100% Brand New Items, Never Used Or Installed
High Quality
Professional installation in highly recommended (No instruction included)​
Interchange Part Number：38810-RZY-A01, 98580, 6512639, 20-4920, CO 4920AC, 38810-RWC-A03, 38810RZYA0
Fitment
2007 -2015 Honda CRV
Take appropriate safety precautions:
AC Compressor Fit For 2007 2008 2009 2010 2011 2012 2013 2014 2015 Honda CRV
Description
100% Brand New Items, Never Used Or Installed
High Quality
Professional installation in highly recommended (No instruction included)​
Interchange Part Number：38810-RZY-A01, 98580, 6512639, 20-4920, CO 4920AC, 38810-RWC-A03, 38810RZYA0
Fitment
2007 -2015 Honda CRV
Take appropriate safety precautions:
1. Wear eye protection (safety glasses).
2. Do not smoke next to the vehicle when performing repairs.
3. Work in a well-ventilated area.
4. Wear skin protection (such as gloves and closed toe shoes).
5. Recover refrigerant before making repairs.
Attention Please:
Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.
1.Remove compressor：Remove the A/C belt from the A/C compressor pulley. May involve loosening the belt tensioner (if equipped).
2.receiver drier or accumulator, orifice tube or expansion valve.
3.Disconnect the negative battery cable.
4.Remove the bolt that secures refrigerant lines to the A/C compressor. Inspect A/C lines for any contamination such as metal or excessive dirt inside of them. If you find any contamination the system will need to be cleaned.Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the  evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet.
5.Drain all the oil from the new compressor ,if you compressor has a drain plug you will need to open it up and drain what oil is in there too.
6.Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
7.Install new receiver drier or accumulator and new orifice tube or expansion valve.
8.Evacuate the A/C system for a minimum of one hour.
9.After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
10.Turn on the A/C system with the engine running and check to see if cold air is now coming out of the air duct.
11.If the A/C system is functioning ,you may find that your electric radiator fan and compressor clutch will be cycling off and on depending on the outside air temperature.
Note：
This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
Please add refrigerant to 70-80% without filling up.There may be noise if the refrigerant is added too much.
Package Includes
1X AC Compressor
As shown in the picture​
Item Specifics
Brand
Unbranded
Manufacturer Part Number
AC34511
UPC
Does not apply
Interchange Part Number 1
38810-RZY-A01, 98580, 6512639, 20-4920
Interchange Part Number 2
CO 4920AC, 38810-RWC-A03, 38810RZYA0
Refrigerant Type
R-134A
Warranty
1 Year
Oil Type
PAG 46
Payment
We will accept Ebay payment.
Shipping
Domestic orders usually takes 1-5 days to arrive.
Returns
If we sent wrong item, we will pay for return shipping fee.
You can return the UNUSED item back to us for a full refund,
Please contact us for return process before you return the item.
Contact US
Usually your message will be answered within 1 business day.
We provide with best service,please buy with confidence.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Hot Item
6" Sandpaper 100 PCS Sanding Disc PSA Sticky Back Grit 40-800 Sand Paper 80 320
USD 21.39
Black Fuel Hose Oil Gas Line AN4-AN6-AN8-AN10-AN12 Nylon/Stainless Steel Braided
USD 9.80
9 x11 in Wet Dry Sandpaper Sheets 80 120 180 240 320 400 600 800 3000 7000Grits
USD 16.36
3" to 3" Silicone Straight Coupler Hose Turbo, Black 76mm Intercooler Pipe
USD 4.99
AN4/AN6/AN8/AN10/AN12 Swivel Hose End Fitting Adapter For Oil/Fuel/Gas Hose Line
USD 4.40
New List Item
40pc ID 15mm Spring Band Clip Action Fuel Silicone Vacuum Hose Clamp 9/16" 0.56"
USD 8.97
8 Set VGT Solenoid IPR Valve Pigtail Fit Ford F250 350 450 550 7.3L 6.0L Diesel
USD 16.42
TURBO CHARGER STAINLESS STEEL 40" 1/8 OIL FEED+21" 10AN RETURN DRAIN LINE KIT
USD 35.99
For LS Electric Water Pump Adapter Plates (Converts Fit BBC Pump to LS Engine)
USD 42.99
Fit 94-97 Ford 7.3L Powerstroke Diesel Valve Cover Gaskets Harness + Glow Plug
USD 84.02
Excellent Delivery
AC Compressor Fit For 2007 2008 2009 2010 2011 2012 2013 2014 2015 Honda CRV
Description
100% Brand New Items, Never Used Or Installed
High Quality
Professional installation in highly recommended (No instruction included)​
Interchange Part Number：38810-RZY-A01, 98580, 6512639, 20-4920, CO 4920AC, 38810-RWC-A03, 38810RZYA0
Fitment
2007 -2015 Honda CRV
Take appropriate safety precautions:
1. Wear eye protection (safety glasses).
2. Do not smoke next to the vehicle when performing repairs.
3. Work in a well-ventilated area.
4. Wear skin protection (such as gloves and closed toe shoes).
5. Recover refrigerant before making repairs.
Attention Please:
Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.
1.Remove compressor：Remove the A/C belt from the A/C compressor pulley. May involve loosening the belt tensioner (if equipped).
2.receiver drier or accumulator, orifice tube or expansion valve.
3.Disconnect the negative battery cable.
4.Remove the bolt that secures refrigerant lines to the A/C compressor. Inspect A/C lines for any contamination such as metal or excessive dirt inside of them. If you find any contamination the system will need to be cleaned.Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the  evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet.
5.Drain all the oil from the new compressor ,if you compressor has a drain plug you will need to open it up and drain what oil is in there too.
6.Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
7.Install new receiver drier or accumulator and new orifice tube or expansion valve.
8.Evacuate the A/C system for a minimum of one hour.
9.After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
10.Turn on the A/C system with the engine running and check to see if cold air is now coming out of the air duct.
11.If the A/C system is functioning ,you may find that your electric radiator fan and compressor clutch will be cycling off and on depending on the outside air temperature.
Note：
This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
Please add refrigerant to 70-80% without filling up.There may be noise if the refrigerant is added too much.
Package Includes
1X AC Compressor
As shown in the picture​
Payment
Shipping
Returns
Contact US
We will accept Ebay payment.
Domestic orders usually takes 1-5 days to arrive.
If we sent wrong item, we will pay for return shipping fee.
You can return the UNUSED item back to us for a full refund,
Please contact us for return process before you return the item.
Usually your message will be answered within 1 business day.
We provide with best service,please buy with confidence.