1x A/C Compressor CO 20765C 977011R100 For 2012-2017 Hyundai Accent Kia Rio 1.6L

Description

Specifications Clutch Diameter (mm): 125 Compressor Mount: Boss Discharge Port (mm): 12.8 Boss Width (mm): 76.5 Compressor Type: DVE12 Control Valve (Yes/No): Yes Displacement: 120 Grooves : 6 HUB TYPE: TL Fitment: 2012-2017 Hyundai Accent 1.6Lwith Automatic Temperature Control;) 2012-2017 Kia Rio 1.6L) OEM and Competitor Interchange: Four Seasons: 177324 Four Seasons: 178324 Global Parts Distributors: 5512957 Global Parts Distributors: 6512957 Global Parts Distributors: 7512957 Hyundai/Kia: 977011R100 Hyundai/Kia: 977011W600 NAPA: 276074 NAPA: TEM276074 Omega: 2022078 Ranshu: 140589 Ranshu: 140589NC Trad Automotive: C2645 Trad Automotive: C2645R UAC: CO 20765C
Visit Our Store
View Feedback
Contact Us
Add to Favorite Seller
Brand Introduction
Store category
Other
Wheel Hub Bearing
Bearing
ATV Bearing
Sign Up Now !
You may also like
1x A/C Compressor CO 20765C 977011R100 For 2012-2017 Hyundai Accent Kia Rio 1.6L
Product Description
Specifications
Clutch Diameter (mm): 125
Compressor Mount: Boss
Discharge Port (mm): 12.8
Boss Width (mm): 76.5
Compressor Type: DVE12
Control Valve (Yes/No): Yes
Displacement: 120
Grooves : 6
HUB TYPE: TL
Fitment:
2012-2017 Hyundai Accent 1.6Lwith Automatic Temperature Control;)
2012-2017 Kia Rio 1.6L)
OEM and Competitor Interchange:
Four Seasons: 177324
Four Seasons: 178324
Global Parts Distributors: 5512957
Global Parts Distributors: 6512957
Global Parts Distributors: 7512957
Hyundai/Kia: 977011R100
Hyundai/Kia: 977011W600
NAPA: 276074
NAPA: TEM276074
Omega: 2022078
Ranshu: 140589
Ranshu: 140589NC
Trad Automotive: C2645
Trad Automotive: C2645R
UAC: CO 20765C
COMPRESSOR INSTALLATION INSTRUCTIONS
Please read these instructions prior to any repairs on your vehicle.
Follow all federal, state, and local regulations when repairing an automotive A/C system.
Take appropriate safety precautions –
1. Wear eye protection (safety glasses).
2. Do not smoke next to the vehicle when performing repairs.
3. Work in a well-ventilated area.
4. Wear skin protection (such as gloves and closed toe shoes).
5. Recover refrigerant before making repairs.
REMOVING THE OLD COMPRESSOR
1. Open the hood of the veh
icle and locate the A/C Compressor.
2. Remove the A/C belt from the A/C Compressor pulley. This may involve loosening the belt tensioner (if it is equipped).
3. Evacuate the A/C system using a refrigerant recovery machine.
4. Disconnect the negative battery cable.
5. Remove the bolt that secures refrigerant lines to the A/C Compressor. Then, inspect the A/C lines for any contamination such as metal or excessive dirt inside them. If any contamination is found, the system will need to be cleaned.
6. Disconnect any electrical connectors from the A/C Compressor.
7. Remove the AC Connections. Remove the A/C Compressor mounting bolts.
8. Remove the A/C Compressor from the vehicle.
INSTALLING THE NEW A/C COMPRESSOR
1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. ​​​​​​​
2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.
Flush evaporators from inlet to outlet.
Flush condensers from outlet to inlet.
NOTE: Condensers produced from 1990 – present are extremely difficult to clean. As a result, if the compressor had a major failure, it is recommended that the condenser be replaced.
3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.
5. Next, install the new A/C Compressor.
6. Install and tighten the A/C Compressor mounting bolts.
7. Reconnect any electrical connectors to the A/C Compressor.
8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.
9. Reconnect the negative battery cable.
10. Evacuate the A/C system with an A/C servicing machine for at least one hour.
11. Check the system for leaks.
12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system. ​​​​​​
13. Start the vehicle’s engine and turn on the A/C system.
Make sure the windows and doors of the vehicle are open.
Should you have any questions regarding the installation of your new or remanufactured compressor, please do not hesitate to contact us.
​​​​​​​
Package Included:
1pc A/C Compressor
（Professional Installer is Highly Recommended ）
Payment
Delivery details
Returns Policy
Contact us
Feedback
Payment
PayPal preferred.
Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute  will be filed with eBay.
Delivery details
We ship your orders via UPS Ground
within 3 business days after the payment cleared.
it usually takes
1-5 business
days to arrive you.
Delivery time depends on destination, weather, customs and other factors, sometimes it will require a bit longer.
If you don't receive the item after 10
days, please contact us, we'll investigate and solve the delivery problem.
Returns Policy
Customer must contact us within 14 days of receiving shipment for approval of any return or exchange. Returns or exchanges will be subject to a 15% restocking fee of the original item purchased plus cost of return shipping and replacement shipping. Exchanges due to shipping errors by us will not be subject to a restocking fee or shipping charges.
Contact us
Our office hour is
Monday to Friday, 8:00AM to 5:00PM
.
We are more than happy to help you check products' compatibility
, answer any question regarding our policy, products, prices, discount for multiple quantity order, shipping and handling fee,
return and item details. Please contact us by going to "Ask a Question" at the bottom of our listing,
or click our eBay ID
"
auto_-5857
",
then Contact Member.
Feedback
We will automatically leave positive feedback to every buyer to complete the transaction.
We maintain high standards pursuit of 100% customer satisfaction! Feedback is very important to us.
Good communication can solve all the problems, if you have any questions, please contact us, we will promptly solve the problems you are experiencing.
Payment
Shipping
Return policy
About us
Feedback